JFE Advantech Co., Ltd. offer repair and consumable parts for 7 years after the end of production as a maintenance support period. As for the terminated products listed below, please refer the Service term and recommended replacements.
Please note that even for models that are in service term, the service period may be shortened due to inevitable reasons such as discontinuation of production of electronic components.
Support and Service
During the service term, following services are offered.
Covered support | In service term |
After the end of service term |
---|---|---|
Sales of optional parts | N/A |
N/A |
Sales of consumable items | ○ |
*1 |
Inspection and calibration | ○ |
*2 |
Repair | *3 |
N/A |
Customization (additional modification) | N/A |
N/A |
*1 After the end of service term, sales of consumables will be limited with stock only.
*2 For inspection and calibration after service term is completed, please contact us.
*3 PC repair is not accepted later than 5 years after product shipment regardless of the service term. Service term of industrial computers will be fixed by suppliers of them.
Data Processor/Display for Truck Scale
Models in Service term
Maintenance period | End of production | Service term | Recommended alternative Products | Remarks |
---|---|---|---|---|
KDI-150 | March 2017 | Scheduled end of service term: End of March 2024 | KDI-155 | |
KDI-135 | December 2022 | Scheduled end of service term: End of December 2029 | KDI-155 |
*If special software is used for the display calculation / recording device, it is necessary to modify the software for the alternative product.
*When using KD-710 , the 1 indicator will be required for replacement.
*For more information, please contact us.
Models those service terms closed
Model | End of production | Service term | Recommended alternative product | Remarks |
---|---|---|---|---|
KD-100 | - | End of support | KD-710 | Dimensions varied |
KD-200 | - | End of support | KD-710 | Dimensions varied |
KD-300A | March 1985 | End of support (March 1992) | KD-710 | Dimensions varied |
KD-300L | March 1985 | End of support (March 1992) | KD-710 | Dimensions varied |
KD-350 | 1994 March | End of support (March 2001) | KD-710 | Dimensions varied |
KD-500 | March 2000 | End of support (March 2007) | KD-710 | Dimensions varied |
KD-520 | December 2006 | End of support (December 2013) | KD-710 | Dimensions varied |
ATD-204 | December 2011 | End of support (December 2016) | KD-710 | Dimensions varied |
KDI-100 | - | End of support | KDI-155 |
Dimensions varied |
KDI-180 | Optional BCD output | |||
KDI-120 | March 1990 | End of support (March 1997) | KDI-155 |
Dimensions varied |
KDI-180 | Prefixed quantity delivery function (option) | |||
KDI-120A | March 1995 | End of support (March 2002) | KDI-155 |
Dimensions varied |
KDI-180 | Prefixed quantity delivery function (option) | |||
KDI-120B | September 2002 | End of support (September 2009) | KDI-155 |
Dimensions varied |
KDI-180 | Prefixed quantity delivery function (option) | |||
KDI-120C | September 2002 | End of support (September 2009) | KDI-155 | Dimensions varied |
KDI-180 | ||||
KDI-125 | September 2002 | End of support (September 2009) | N/A | |
KDI-130 | December 2010 | End of support (December 2017) | KDI-155 | Dimensions varied |
*If special software is used for the display calculation / recording device, it is necessary to modify the software for the alternative product.
*When using KD-710 , the 1st indicator will be required separetely.
*For more information, please contact us.
Data Processor/Display for Truck Scale
Products in service term
Model | End of production | Service term | Recommended alternative product | Remarks |
---|---|---|---|---|
KD-600V (Windows® 7) |
December 2017 | Will close at end of December 2024 | KD-710 or KD-600W・V (Windows® 10) | Configuration/ dimensions varied |
KD-700 | December 2021 | Scheduled end of service term: End of December 2028 | KD-710 | Configuration/dimensions varied |
* PC and POS terminals repair is not accepted later than 5 years after product shipment regardless of the service term.
Service of industrial computers is subject to the regulations.
*If special software is used for the display calculation / recording device, it is necessary to modify the software for the alternative product.
*Windows is registered trademarks of Microsoft Corporation in the United States and/or other countries.
Models those service terms closed
Model | End of production | Service term | Recommended alternative product | Remarks |
---|---|---|---|---|
KD-3000 | March 1987 | End of support(March 1994) | KD-710 or KD-600W・V (Windows® 10) | Configuration/ dimensions varied |
KD-4000 | March 1987 | End of support (March1994) | KD-710 or KD-600W・V (Windows® 10) | Configuration/ dimensions varied |
KD-400 | March 1995 | End of support (March 2002) | KD-710 or KD-600W・V (Windows® 10) | Configuration/ dimensions varied |
KD-600 (Windows® 3.1) |
March 2000 | End of support (March 2007) | KD-710 or KD-600W・V (Windows® 10) | Configuration/ dimensions varied |
KD-600 (Windows® NT) |
March 2000 | End of support (March 2007) | KD-710 or KD-600W・V (Windows® 10) | Configuration/ dimensions varied |
KD-600V (Windows® 95) |
May 2001 | End of support (May 2008) | KD-710 or KD-600W・V (Windows® 10) | Configuration/ dimensions varied |
KD-600V (Windows® 98) |
July 2001 | End of support (July 2008) | KD-710 or KD-600W・V (Windows® 10) | Configuration/ dimensions varied |
KD-600V (Windows® Me) |
October 2001 | End of support (October 2008) | KD-710 or KD-600W・V (Windows® 10) | Configuration/ dimensions varied |
KD-600V (Windows® 2000) |
June 2004 | End of support (June 2011) | KD-710 or KD-600W・V (Windows® 10) | Configuration/ dimensions varied |
KD-600V (Windows XP版) |
March 2010 | End of support (March 2017) | KD-710 or KD-600W・V (Windows® 10) | Configuration/ dimensions varied |
KD-600V (Windows® Vista) |
November 2011 | End of support (November 2018) | KD-710 or KD-600W・V (Windows® 10) |
Configuration Dimensions varied |
*If special software is used for the display calculation / recording device, it is necessary to modify the software for the alternative product.
*Windows is registered trademark of Microsoft Corporation in the United States and/or other countries.
Card reader for truck scale
Products in service term
Model | End of production | Service term | Recommended alternative product | Remarks |
---|---|---|---|---|
CR-50 | March 2017 | Will close at end of March 2024 | N/A | |
CR-30 (Punch card reader type) |
February 2019 | Will close at end of February 2026 | N/A | *2 |
Models those service terms closed
Model | End of production | Service term | Recommended alternative product | Remarks |
---|---|---|---|---|
CR-10 | March 2001 | End of support (March 2008) | N/A | |
CR-15 | March 2001 | End of support (March 2008) | CR-30 | |
CR-20 | September 2015 | Scheduled end of service term: End of September 2022 | CR-30 |
*1 The service term for card readers earlier than CR-10 and special-purpose card readers delivered before 1995 has reached end.
*2 Recommended alternative product for Punch card reader type is not available. Please consider an IC card reader type.
For more information, please contact us.
JFE Kuramae Bldg. 2F,2-17-4 Kuramae, Taito-ku, Tokyo 111-0051,Japan
Tel +81-3-5825-5577 Fax +81-3-5825-5591