Ultrasonic Hardness Tester SONOHARD^™

Most suitable handy hardness tester for on-site measurement
Portable ultrasonic hardness tester is lightweight and easy to carry, and also works in testing room and etc.

　

Features
1. Quick measurement (a few seconds)
2. Extremely minute indentations (Approx. 0.1mm)
3. Direct reading of hardness values (HV, HRC, HS, and HBW)
4. Conversion to tensile strength (N/mm²)
5. Measuring tables (wooden, iron, resin, etc.) do not affect measurement
6. Back sides of test samples do not affect measurement.
7. Data can be stored in memory up to 2000 pieces.
8. 10 pieces of calibration memory
9. Handy and battery powered tester makes it easy to carry out for on site measurements.
10. Free measuring ability in all directions
11. Beneficial to reducing costs by making periodic part replacement unnecessary
12. Hardening and annealing can be controlled according to hardness levels
13. Possible to make output to an external printer (Option)
14. Upper and lower limit alarms can be established.
15. In-Line automatic measurement (Option)

Perfect for hardness check on narrow/curved surface by small diameter probe
Robust and durable portable hardness tester SONOHARD™

Features
1. Probe tip diameter 8mm enables narrow and curved measurements.
2. High durability – more than one million measurements
3. Measurement in just 2 seconds
4. Static loading method with Vickers indenter
5. Tiny indentation (approx.0.1mm)
6. Measurement is not affected by material / mass of measuring base
7. Measurement can be done in all directions
8. Upper / Lower limit alarm setting available
9. Integratable to your production-line (Option)