Hopper Weigher
HOME > Weighing Systems and Products > Hopper Weigher

Hopper Weigher

This weigher can be easily installed in a hopper for faster construction by adopting our prominent load cells with built-in constrainer.

POINT 1
New innovative mounting bracket
The hopper mounting bracket has built-in constrainer. Since the hopper weigher does not require mechanisms such as a cross brace or check rods, the space required for the hopper can be reduced, thereby facilitating installation.
POINT 2
Highly earthquake-resistant design
The constrainer is designed to be safe for a seismic factor of 1.0.
POINT 3
Available with a high-precision hopper scale and in flame-proof configurations.

Specifications

Model CB-1 CB-2-5 CB-2-10 CB-3-10 CB-3-20 CB-3-30 CB-4
Load cell type HR-2 HR-5 HR-10 HR-10 HR-20 HR-30 HR-50
Rated load 19.6kN 49kN 98.1kN 98.1kN 196kN 294kN 490kN
2tf 5tf 10tf 10tf 20tf 30tf 50tf
Safe horizontal load 39.2kN 98.1kN 157kN
4tf 10tf 16tf
PAGE TOP
 

System configuration

System configuration

PAGE TOP
Weighing Systems and Products

  • JFE Advantech
  • Service and Support Phone:+81-3-5825-5577 Fax:+81-3-5825-5591
  • Request for documents
PAGE TOP